Coastal Orange County - licensed, flat-rate installs
Newport Beach Water Systems logo
Rusty valve handle on an old water line
Iron & Sulfur Removal

Iron & Sulfur Removal in Newport Beach

Oxidizing treatment for homes across Orange County that ends orange staining and rotten-egg odor at the source.

Your Free Quote Starts Here - (000) 000-0000
Overview

End Rust Stains and Sulfur Odor in Your Newport Beach Home

Orange-brown stains in the sinks and tubs, discolored laundry, and a rotten-egg smell at the tap are the classic signs of iron and sulfur in the water, and they don't clear up with cleaning alone. Iron and sulfur removal treats the problem at its source through oxidation, converting the dissolved minerals and gas so they can be filtered out.

Newport Beach Water Systems starts with a test, because the iron form and sulfur level dictate the oxidizing method and system size. Homeowners on wells and some on private supply lines call us when the staining becomes constant or the smell won't go away. Once the oxidizing stage is dialed in, the staining stops and the odor disappears. Laundry, fixtures, and water all come back clean.

What's Included

What an Iron & Sulfur Removal Install Covers

Built to your test results, a typical project includes the following.

On-site testing to identify iron form, sulfur level, and pH, which drive the oxidizing approach.
Oxidizing system selection — air injection, catalytic media, or chemical feed as the water requires.
Sediment pre-filtration where oxidized particles need capturing downstream.
pH correction where acidity affects oxidation performance.
Licensed point-of-entry installation with proper backwash setup.
Backwash-cycle programming matched to your iron and sulfur load.
Flow and pressure verification across the system.
Integration with softening or additional filtration where specified.
Sanitization of the assembly and lines before service.
A maintenance and media-refresh schedule tailored to your water.
How It Works

How We Remove Iron & Sulfur

1

Water Test

We test for iron form, sulfur, and pH on-site and review the results with you. Those readings decide the oxidizing method and sizing. The visit is obligation-free.

2

System Design & Flat-Rate Quote

We match an oxidizing system to your water chemistry, then provide an itemized flat-rate quote. You approve it before install.

3

Install & Verification

Licensed techs install the system, program the backwash cycle, verify flow, and sanitize the lines. Most installs are same-week, and we walk you through the maintenance.

Why Us

Why Homeowners Pick Us for Iron & Sulfur Removal

Method Matched to the Chemistry

Iron comes in forms that respond differently to oxidation, so we test to pick air injection, catalytic media, or chemical feed correctly. Guessing here leads to recurring stains.

Odor Gone at the Source

We treat the sulfur where it enters rather than masking it, so the rotten-egg smell doesn't creep back.

Backwash Tuned to Your Load

Programming the cycle to your actual iron level keeps the media effective and the water clean long-term.

Licensed & Insured (CA C-55 / C-36)Flat-Rate PricingMost Installs Same-WeekWQA-Trained Specialists

Clean, Odor-Free Water in Your Newport Beach Home

Iron staining and sulfur odor won't resolve until they're treated at the source, and the test tells us exactly how. Book your test and get a flat-rate quote.