Coastal Orange County - licensed, flat-rate installs
Newport Beach Water Systems logo
Woman holding a glass of drinking water
Reverse Osmosis Systems

Reverse Osmosis Systems in Newport Beach

Multi-stage RO drinking water for homes from Mariner's Mile to Newport Heights, installed and serviced by licensed local technicians.

Your Free Quote Starts Here - (000) 000-0000
Overview

Crisp, Low-TDS Drinking Water for Your Newport Beach Home

If the reason you keep buying bottled water is taste, a reverse osmosis system usually ends that habit for good. RO forces water through a semipermeable membrane that strips dissolved solids down to a clean, low-TDS finish, and most families notice the difference from the first glass.

Newport Beach Water Systems begins with a test that reads your TDS and problem contaminants, because that number tells us how many stages your setup needs. Homeowners across Newport Beach typically add RO at the kitchen sink, where the water they drink and cook with matters most. The unit tucks under the counter with a dedicated faucet on top, and the install is tidy and same-day in most homes. It pairs well with whole-house filtration, but it also stands on its own as a focused drinking-water upgrade.

What's Included

What an RO Installation Covers

Built to your test results, a typical reverse osmosis project includes the following.

On-site TDS and contaminant testing that determines the stage count and membrane rating your water calls for.
Multi-stage system selection — sediment pre-filter, carbon stages, RO membrane, and polishing filter as needed.
Under-sink installation with a dedicated drinking-water faucet drilled or mounted at the sink.
Connection to the cold supply and a proper drain saddle for the reject line, done by licensed techs.
Storage tank placement and pressure setting so you get steady flow at the faucet.
Optional remineralization stage for homeowners who prefer added minerals back in the finished water.
Leak-check and sanitization of the full assembly before handover.
TDS verification at the new faucet to confirm the membrane is performing to spec.
Fridge and ice-maker line integration where requested.
A filter and membrane replacement schedule tailored to your usage.
How It Works

How We Install Reverse Osmosis

1

Water Test

We measure your TDS and check for the contaminants RO targets, then review the results with you. The reading decides how many stages your system needs. The visit is brief and obligation-free.

2

System Selection & Flat-Rate Quote

We match a multi-stage RO unit to your water and your sink setup, then give you an itemized flat-rate quote. You approve the price before we install anything.

3

Under-Sink Install & Verification

Licensed techs mount the system, set the faucet, connect the drain, pressurize the tank, and verify the finished TDS at the tap. Most installs are same-day, and we show you how and when to change the filters.

Why Us

Why Homeowners Pick Us for RO Systems

Staged to Your Actual TDS

We size the membrane and stages to your reading, so you're not overpaying for capacity your water doesn't require. The test sets the spec.

Clean Under-Sink Work

Proper drain saddles, leak checks, and tank pressure settings are where sloppy installs fail. Our licensed crew handles the details that keep it dry and quiet.

Straightforward on Filters

We leave you with a clear replacement schedule and can handle the changes on a plan, so performance never quietly drops off.

Licensed & Insured (CA C-55 / C-36)Flat-Rate PricingMost Installs Same-DayNSF/ANSI-Certified (Standard 58)

Better Drinking Water at Your Newport Beach Sink

A reverse osmosis system can retire the bottled water for good, and the test confirms whether it's the right call for your water. Book your test and get an honest, flat-rate quote.